2019-08-13

USB Hub - Center Console - Rear (Remove and Replace)

Correction code 21260602 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 센터콘솔 공기 통풍구 패널을 탈거합니다. Assembly - Rear Vent - Center Console (Remove and Replace)을(를) 참조하십시오.
  2. 통풍구 장치를 센터콘솔 공기 통풍구 패널에 고정하는 나사를 탈거하고 패널에서 통풍구 장치를 탈거합니다.
    1.6 Nm (1.2 lbs-ft)
  3. 후면 센터콘솔 USB 허브를 센터콘솔 공기 통풍구에 고정하는 나사를 탈거하고 통풍구에서 USB 허브를 탈거합니다.
    1.1 Nm (.8 lbs-ft)

Install

Installation procedure is the reverse of removal.