2023-02-28

Thermistor - Duct - Upper - LH (Heat Pump) (Remove and Replace)

Correction code 18101102 0.48 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. LV 전원을 연결 해제합니다. 12V/LV Power (Disconnect and Connect)을(를) 참조하십시오.
  2. 페달 어셈블리를 탈거합니다. Brake Pedal (Remove and Replace)을(를) 참조하십시오.
  3. LH 상단 덕트 서미스터에서 전기 하네스를 연결 해제합니다.
  4. 지렛대 도구를 사용하여 서미스터를 상단 HVAC 덕트에 고정하는 탭(2개)을 분리한 다음 차량에서 서미스터를 탈거합니다.

Install

  1. 장착 탭이 체결되도록 LH 상단 덕트 서미스터를 상단 HVAC 덕트에 배치합니다.
  2. 전기 하네스를 LH 상단 덕트 서미스터에 연결합니다.
  3. 접근하기 위해 탈거한 모든 구성품을 설치합니다. Brake Pedal (Remove and Replace)을(를) 참조하십시오.