팬 - 라디에이터(탈거 및 교체)
Correction code
18201502
1.02
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 액티브 그릴 셔터를 탈거합니다. 참조 항목: Active Grille Shutter (Heat Pump) (Remove and Replace).
-
라디에이터를 냉각 팬 및 슈라우드 어셈블리에 고정하는 상단 및 하단 잠금 탭을 분리한 다음 냉각 팬 및 슈라우드 어셈블리에서 라디에이터를 탈거합니다.
-
냉각 팬 및 슈라우드 어셈블리에서 볼트 및 절연체를 탈거합니다.
Install
Installation procedure is the reverse of removal.