Switch - Back Rest and Cushion Adjust - Driver Seat (Remove and Replace)
Correction code
13015102
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 운전석 시트 외측 사이드 실드를 탈거합니다. Side Shield - Outboard - Driver Seat (Remove and Replace)을(를) 참조하십시오.
-
운전석 시트 등받이 및 쿠션 조정 스위치에 시트 쿠션 및 시트 등받이 버튼을 고정하는 클립을 조심스럽게 분리한 다음 외측 사이드 실드에서 버튼을 탈거합니다.
-
운전석 시트 등받이 및 쿠션 조정 스위치를 외측 사이드 실드에 고정하는 나사를 탈거하고 사이드 실드에서 스위치를 탈거합니다.
Install
-
운전석 시트 등받이 및 쿠션 조정 스위치를 외측 사이드 실드에 고정하는 나사를 장착한 다음 스위치를 사이드 실드에 고정하는 나사를 장착합니다.1.7 Nm (1.3 lbs-ft)
-
시트 쿠션 및 등받이 버튼을 외측 사이드 실드에 장착한 다음 운전석 시트 등받이 및 쿠션 조정 스위치에 시트 쿠션 및 등받이 버튼을 고정하는 클립을 조입니다.
- 운전석 시트 외측 사이드 실드를 장착합니다. Side Shield - Outboard - Driver Seat (Remove and Replace)을(를) 참조하십시오.