Pivot Sleeve - Seat Back - 2nd Row - LH (Remove and Replace)
Correction code
13057102
0.24
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 2열 LH 시트 등받이 어셈블리를 탈거합니다. Seat Back - 2nd Row - LH (Remove and Replace)을(를) 참조하십시오.
-
피벗 슬리브를 시트 등받이 어셈블리 피벗 핀에 고정하는 탭을 분리한 다음 슬리브를 핀에서 분리합니다.
Install
Installation procedure is the reverse of removal.