2025-02-28

센서 - 외기 온도(히트 펌프 이외)(탈거 및 교체)

Correction code 18107202 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

  • 2025-02-11: 전면 페시아 단계를 삭제했습니다.

Remove

  1. 차량을 2포스트 리프트에 배치합니다.
    Informational PurposesAn informational icon, calling your attention
    TIp
    차량이 충전 중이 아닌지 확인하십시오.
  2. 후드 내 보관 유닛을 탈거합니다. 참조 항목: Underhood Storage Unit (Remove and Replace).
  3. 외기 온도 센서 커넥터에서 전기 하네스를 연결 해제합니다.
  4. 외기 온도 센서를 하단 그릴에 고정하는 클립을 푼 다음 하단 그릴에서 센서를 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    외기 온도 센서를 고정하는 탭을 누르고 위로 밀어 하단 그릴에서 탈거합니다.

Install

  1. 외기 온도 센서를 하부 그릴에 고정합니다.
  2. 외기 온도 센서 커넥터에 전기 하네스를 연결합니다.
  3. 후드 내 보관 유닛을 장착합니다. 참조 항목: Underhood Storage Unit (Remove and Replace).
  4. 리프트에서 차량을 내립니다.