2024-11-08

Cap - Wheel (Remove and Replace)

Correction code 18인치 Pinwheel: 34015021 0.05 Correction code 19인치 Stiletto 또는 20인치 Sport: 34015011 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Warning IconA warning icon, calling your attention to a possibly risky situation
경고
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
  • 1044206-00-A 휠 트림 탈거 공구

Remove

  1. 휠 유형에 따라 휠 캡을 탈거합니다.
    • 18인치 Pinwheel 휠: 참조 단계: 2
    • 19인치 Stiletto 또는 20인치 Sport 휠: 참조 단계: 3
  2. 양손으로 휠 캡을 부드럽게 당겨 휠 캡을 휠에 고정하는 클립을 분리합니다.
  3. 휠 트림 탈거 도구를 센터 캡의 구멍에 삽입한 다음 당겨서 센터 캡을 탈거합니다.
    그림 1. 휠 트림 탈거 공구
    그림 2. 휠 트림 탈거 공구가 삽입됨

Install

  1. Tesla "T" 하단이 밸브 스템을 가리키도록 휠 캡을 휠에 배치합니다.
    그림 3. 18인치 핀휠 "에어로" 휠 캡
    그림 4. 19인치 또는 20인치 휠 캡
  2. 캡 중앙이 제자리에 끼워질 때까지 휠에 단단히 누릅니다.