Decor Trim - Instrument Panel - Main (Rework)
Correction code
14057007
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
재작업
- 주 계기판 장식 트림을 탈거합니다. Decor Trim - Instrument Panel - Main (Remove and Replace)을(를) 참조하십시오.
- 주 계기판 장식 트림을 휴대용 벤치 또는 지지대에 뒤집어서 배치합니다.
-
알루미늄 프레임과 주 계기판 장식 트림의 나무 또는 플라스틱 부분 사이의 움직임을 확인합니다.
-
알루미늄 프레임과 주 계기판 장식 트림의 나무 또는 플라스틱 부분 사이에 핫멜트 접착제를 도포합니다.
참고접착력이 단단하고 고르게 분포되었는지 확인하십시오.
Install
Installation procedure is the reverse of removal, except for the following:
- 클립이 손상되었는지 점검하고 필요한 경우 클립을 교체합니다.
- 계기판 장식 트림 클립이 계기판에 완전히 안착되었는지 확인합니다.
- 계기판 장식 트림 클립이 완전히 안착되었는지 확인하기 위해 Toolbox를 사용하여 에어 웨이브 기능 점검을 수행합니다.