2024-09-09

Grille - Speaker - Instrument Panel (Remove and Replace)

Correction code 14054702 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Warning IconA warning icon, calling your attention to a possibly risky situation
경고
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.

Remove

  1. LH 및 RH 계기판 엔드캡을 탈거합니다. 참조 항목: End Cap - Instrument Panel - LH (Remove and Replace).
  2. LH 및 RH 중간 A필러 트림을 탈거합니다. Trim - A-Pillar - Middle - LH (Remove and Replace)을(를) 참조하십시오.
  3. LH 및 RH 상단 A필러 트림을 탈거합니다. Trim - A-Pillar - Upper - LH (Remove and Replace)을(를) 참조하십시오.
  4. 스피커 그릴을 차체에 고정하는 클립을 분리합니다. 스피커 그릴의 후면을 위쪽으로 회전시킨 후, 그릴을 차량 뒤쪽으로 당겨 탈거합니다.

Install

  1. 계기판 스피커 그릴의 손상된 클립을 모두 교체합니다.
  2. 계기판 스피커 그릴을 계기판 위의 위치에 배치합니다.
  3. 계기판 그릴을 차량에 고정하는 클립을 부착합니다. 플라스틱 지렛대 스틱을 사용해 수직 클립을 전방으로 눌러 IP 캐리어 내부에 삽입되도록 합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    다음을 확인하십시오.
    • 계기판 스피커 그릴 전면 후크는 IP 캐리어에 완전히 체결되어야 합니다.
    • 윈드실드의 하단에 간격이 없어야 합니다.
  4. LH 및 RH 상단 A필러 트림을 장착합니다. Trim - A-Pillar - Upper - LH (Remove and Replace)을(를) 참조하십시오.
  5. LH 및 RH 중간 A필러 트림을 장착합니다. 참조 항목: Trim - A-Pillar - Middle - LH (Remove and Replace).
  6. LH 및 RH 계기판 엔드캡을 장착합니다. 참조 항목: End Cap - Instrument Panel - LH (Remove and Replace).