2020-12-16

Cover - Rocker Panel - Lower - LH (Remove and Replace)

Correction code 12202602 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Torque Specifications

표 1. 토크 규격: Cover - Rocker Panel - Lower - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
LH 하단 로커 패널 커버를 차체에 고정하는 볼트
5 Nm (3.7 lbs-ft)
  • 10mm 소켓
  • 6인치 익스텐션
Reuse

Remove

  1. LH 하단 로커 패널 볼트 커버를 분리합니다.
  2. LH 하단 로커 패널 커버를 차체에 고정하는 볼트를 탈거합니다.
    5 Nm (3.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10mm 소켓
    • 6인치 익스텐션
  3. LH 하단 로커 패널 커버를 전륜 및 후륜 휠 아치 라이너에 고정하는 클립을 분리합니다.
    그림 1. 전륜
    그림 2. 후륜
  4. LH 하단 로커 패널 커버를 로커 패널에 고정하는 클립을 분리한 다음 패널에서 커버를 탈거합니다.

Install

Installation procedure is the reverse of removal.