2019-08-13

Harness - Headliner (Remove and Replace)

Correction code 17102502 0.96 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 헤드라이너를 탈거합니다. Headliner (Non-Heat Pump) (Remove and Install)을(를) 참조하십시오.
  2. LH 헤드라이너 트위터 커넥터에서 전기 하네스를 연결 해제합니다.
  3. 전면 오버헤드 콘솔 커넥터에서 전기 하네스를 연결 해제합니다.
  4. RH 헤드라이너 트위터 커넥터에서 전기 하네스를 연결 해제합니다.
  5. 후면 오버헤드 콘솔 커넥터에서 전기 하네스를 연결 해제합니다.
  6. 헤드라이너 하네스를 헤드라이너에 고정하는 접착제 부착 포인트(x6)를 분리합니다.
  7. 헤드라이너 하네스를 헤드라이너에 고정하는 클립을 풀어준 다음, 헤드라이너에서 하네스를 탈거합니다.

Install

Installation procedure is the reverse of removal, except for the following:

  • 글루건을 사용하여 헤드라이너 하네스를 헤드라이너에 부착합니다. 접착제가 안착될 때까지 기다립니다.