Bracket - Retainer - Busbar - Charge Port to HV Battery (3-Phase) (Remove and Replace)
Correction code
44018202
0.42
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- HV 배터리 버스바 안전 캡에 연결된 3상 충전 포트를 탈거합니다. Safety Cap - Busbar - Charge Port to HV Battery (Remove and Replace)을(를) 참조하십시오.
-
픽 공구를 사용하여 버스바 리테이너 브래킷을 버스바 브래킷에 고정하는 탭(3개)을 부드럽게 분리한 다음 차량에서 리테이너 브래킷을 탈거합니다.
참고브래킷이 손상될 수 있으므로 과도하게 힘을 주어 벌리지 마십시오.
Install
Installation procedure is the reverse of removal.