2020-03-13

Speaker - Front Door - LH (Remove and Replace)

Correction code 21210102 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Torque Specifications

표 1. Torque Specifications: Speaker - Front Door - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
전면 도어 스피커를 도어에 고정하는 나사
4 Nm (2.9 lbs-ft)
  • 8mm 소켓
  • ¼인치 표준 래칫
  • ¼인치 토크 렌치(장착 전용)
  • 2인치 익스텐션
Reuse

Remove

  1. LH 전면 도어 트림 패널을 탈거합니다. Panel - Door Trim - Front - LH (Remove and Replace)을(를) 참조하십시오.
  2. 전면 도어 스피커에서 전기 커넥터를 연결 해제합니다.
  3. 전면 도어 스피커를 도어에 고정하는 나사를 탈거한 다음 스피커를 탈거합니다.
    4 Nm (2.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 8mm 소켓
    • ¼인치 표준 래칫
    • ¼인치 토크 렌치(장착 전용)
    • 2인치 익스텐션

Install

Installation procedure is the reverse of removal.