Quad Camera Cover - Upper (Remove and Replace)
Correction code
15051802
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
- 2023-07-20: 탈거 부분의 3단계에 비디오를 추가했습니다.
Remove
- 하단 쿼드 카메라 커버를 탈거합니다. 참조 항목: Quad Camera Cover - Lower (Remove and Replace).
- 리어 뷰 미러를 탈거합니다. 참조 항목: Mirror - Rear View (Remove and Replace).
-
상단 쿼드 카메라 커버를 고정하는 클립을 분리하고 실내 카메라 커넥터를 연결 해제한 다음, 차량에서 상단 쿼드 카메라 커버와 실내 카메라 어셈블리를 탈거합니다.
경고전기 하네스가 실내 카메라에 여전히 고정되어 있으므로 상단 쿼드 카메라 커버를 과도한 힘으로 당기지 마십시오.경고The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
-
실내 카메라를 상단 쿼드 카메라 커버에 고정하는 나사를 탈거한 다음, 상단 쿼드 카메라 커버에서 실내 카메라를 탈거합니다.
Install
-
실내 카메라를 상단 쿼드 카메라 커버에 위치시킨 다음, 실내 카메라를 상단 쿼드 카메라 커버에 고정하는 나사를 장착합니다.1 Nm (.7 lbs-ft)
-
실내 카메라 커넥터를 연결한 다음, 상단 쿼드 카메라 커버를 차량에 고정하는 클립을 장착합니다.
- 리어 뷰 미러를 장착합니다. 참조 항목: Mirror - Rear View (Remove and Replace).
- 하단 쿼드 카메라 커버를 장착합니다. 참조 항목: Quad Camera Cover - Lower (Remove and Replace).