2024-09-09

Window Regulator (Recalibrate)

Correction code 11500010 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

  • 2024-06-05: 보정 단계를 터치스크린을 사용하도록 업데이트했습니다.
그림 1. M3에서 본 모습, MY도 유사함
Warning IconA warning icon, calling your attention to a possibly risky situation
경고
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
  1. 운전석에 탑승하여 도어를 닫습니다.
  2. 터치스크린을 사용하여 정비 모드를 활성화합니다. 참조 항목: Service Mode.
  3. 차량 게이트웨이를 잠금 해제합니다. 참조 항목: 게이트웨이(잠금 해제)
  4. 터치스크린에서 Controls > Service Mode > Closures > Windows를 터치한 다음 각 창문의 Calibrate버튼을 탭하여 창문을 보정합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    창문 보정 중에는 창문 보정이 완료될 때까지 선택한 창문이 위아래로 움직입니다.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고
    창문 보정 중에는 끼임 감지가 비활성화됩니다.
  5. 정비 모드를 종료합니다. 참조 항목: Service Mode.