Liner Stiffener- Front Wheel House - LH (Remove and Replace)
Correction code
10018802
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 스티어링 휠을 완전히 오른쪽으로 돌립니다.
- LH 전면 휠 아치 라이너를 차량에 고정하는 푸시 클립(3개)을 탈거합니다.
- 전면 페시아에서 LH 휠하우스 라이너를 당겨서 빼냅니다.
-
전면 페시아에서 LH 전면 휠 하우징 라이너 보강재를 탈거합니다.
Install
- 전면 페시아에서 LH 전면 휠 하우징 라이너 보강재를 장착합니다.
- LH 휠하우스 라이너를 설치된 위치로 다시 이동합니다.
-
LH 전면 휠 아치 라이너를 차량에 고정하는 푸시 클립(3개)을 장착합니다.
- 스티어링 휠을 완전히 중앙으로 돌립니다.