2025-06-27

Latch - Hood (Remove and Replace)

Correction code 11352002 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

Informational PurposesAn informational icon, calling your attention
참고
후드 래치가 전자적으로 열리지 않으면 수동 전면 트렁크 도구를 사용하여 후드를 엽니다.
  • 1130534-00-A도구, 프렁크 릴리스, 수동, Model 3
  1. 후면 후드 내 에이프런을 탈거합니다. 참조 항목: Underhood Apron - Rear (Remove and Replace).
  2. 실내 흡기 덕트를 탈거합니다. 참조 항목: 덕트 - 상단 - 실내 흡기(탈거 및 교체).
  3. 후드 래치 커버를 탈거합니다. 참조 항목: Cover - Hood Latch (Remove and Replace).
  4. 후드 내 보관 유닛을 탈거합니다. 참조 항목: Underhood Storage Unit (Remove and Replace).
  5. 후드 래치에서 기본 후드 래치 액추에이터 케이블을 분리합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    후드 래치 암에서 기본 래치 액추에이터 케이블을 탈거하기 전에 클립을 분리합니다.
  6. 후드 래치에서 보조 후드 래치 액추에이터 케이블을 분리합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    후드 래치 암에서 보조 래치 액추에이터 케이블을 탈거하기 전에 클립을 분리합니다.
  7. 후드 래치 커넥터에서 전기 커넥터를 연결 해제합니다.
  8. 후드 래치의 위치를 마스킹 테이프로 표시합니다.
  9. 전면 엔드 캐리어에 후드 래치를 고정하는 볼트를 탈거한 다음 차량에서 래치를 탈거합니다.
    8 Nm (5.9 lbs-ft)

Install

Installation procedure is the reverse of removal.