Latch - Seat Back - 2nd Row - LH (Remove and Replace)
Correction code
13055902
0.60
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 2열 중앙 시트 안전벨트 어셈블리를 탈거합니다. Seatbelt - 2nd Row - Center (Remove and Replace)을(를) 참조하십시오.
-
시트 등받이에 래치 브래킷을 고정하는 케이블 클립을 분리합니다.
-
시트 등받이에 브래킷 스터드를 고정하는 클립을 분리합니다.
-
2열 LH 시트 등받이 래치를 시트 등받이에 고정하는 볼트를 탈거한 다음, 시트 등받이에서 래치를 탈거합니다.40 Nm (29.5 lbs-ft)
Install
-
2열 LH 시트 등받이 래치를 시트 등받이에 장착한 다음 래치를 시트 등받이에 고정하는 볼트를 장착합니다.40 Nm (29.5 lbs-ft)
-
시트 등받이에 브래킷 스터드를 고정하는 클립을 조입니다.
-
시트 등받이에 래치 브래킷을 고정하는 케이블 클립을 조입니다.
- 2열 중앙 시트 안전벨트를 장착합니다. Seatbelt - 2nd Row - Center (Remove and Replace)을(를) 참조하십시오.