2020-03-04

Side Shield - Inboard - Driver Seat (Remove and Replace)

Correction code 13074602 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. LH 전면 도어를 엽니다.
  2. 운전석 시트를 맨 뒤쪽의 가장 낮은 위치로 이동합니다.
  3. 후면 RH 도어를 엽니다.
  4. 내측 사이드 실드를 탈거합니다.
    1. 시트 내측 시트 레일에 내측 사이드 실드를 고정하는 앞쪽 클립을 분리합니다.
    2. 내측 시트 레일에서 내측 사이드 실드의 뒤쪽 부분을 분리한 다음 사이드 실드를 위쪽으로 돌립니다.
    3. 버클을 내측 사이드 실드의 슬롯을 통해 빼낸 다음 차량에서 내측 사이드 실드를 탈거합니다.

Install

Installation procedure is the reverse of removal.