2019-08-13

Actuator - Vent - RH (Remove and Replace)

Correction code 18103502 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. RH 전면 통풍구를 탈거합니다. Vent - Front - RH (Remove and Replace)을(를) 참조하십시오.
  2. RH 통풍구 액추에이터를 RH 전면 통풍구에 고정하는 나사를 탈거한 다음 통풍구에서 액추에이터를 탈거합니다.
    1.3 Nm (1.0 lbs-ft)

Install

Installation procedure is the reverse of removal.