2022-06-20

Switch - Back Rest and Cushion Adjust - Front Passenger Seat (Rework)

Correction code 13015203 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Retrofit

  1. 전면 동승석 시트 스위치를 탈거합니다. Switch - Back Rest and Cushion Adjust - Driver Seat (Remove and Replace)을(를) 참조하십시오.
  2. 클립 도구를 사용하여 럼버 버튼 캡을 탈거합니다.
  3. 플라이어 또는 사이드 커터를 사용하여 직사각형 플라스틱 짐벌을 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    양쪽 손잡이 멈춤쇠가 모두 있고 잔해가 없는지 확인합니다.
  4. 새 럼버 버튼 캡을 장착합니다.