Seal - Glass Run - Front Door - LH (Remove and Replace)
Correction code
11701112
0.30
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- LH 전면 도어 트림 패널을 탈거합니다. Panel - Door Trim - Front - LH (Remove and Install)을(를) 참조하십시오.
- 도어에서 LH 전면 도어 내측 벨트 씰을 탈거합니다. Seal - Inner Belt - Front Door - LH (Remove and Replace)을(를) 참조하십시오.
- LH 도어 미러 어셈블리를 탈거합니다. 참조 항목: Mirror - Door - LH (Remove and Replace).
-
LH 전면 도어 글라스 런 씰을 위쪽으로 당겨 LH 전면 도어에서 탈거합니다.
Install
-
새 LH 전면 도어 글라스 런 씰을 LH 전면 도어에 배치합니다.
TIp필요한 경우, 장착에 도움이 되도록 씰의 길이만큼 소량의 P80 윤활유를 도포합니다.
- LH 도어 미러 어셈블리를 장착합니다. 참조 항목: Mirror - Door - LH (Remove and Replace).
- LH 전면 도어 내측 벨트 씰을 장착합니다. 참조 항목: Seal - Inner Belt - Front Door - LH (Remove and Replace).
- LH 전면 도어 트림 패널을 장착합니다. 참조 항목: Panel - Door Trim - Front - LH (Remove and Install).