2022-04-24

User Data (Factory Reset)

Correction code 00022008 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Procedure

Informational PurposesAn informational icon, calling your attention
참고
아래 정비 절차는 이전 사용자의 자격 증명을 사용할 수 없는 경우 차량 사용자 데이터를 초기화하는 방법에 대해 자세히 설명합니다.
  1. Enable Service Mode. See Service Mode.
  2. Actions/Autodiag(작업/자동 진단)을 선택한 다음 "Reset(초기화)"를 검색합니다.
  3. "Service Factory Reset(정비 공장 출고 초기화)" 루틴을 선택한 다음 Run(실행)을 클릭합니다.
  4. 루틴이 완료되면 창을 닫고 정비 모드를 종료합니다. Service Mode을(를) 참조하십시오.