Cover - Airbag - Knee - Driver (Remove and Replace)
Correction code
14056002
0.36
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 운전석 무릎 에어백을 탈거합니다. Airbag - Knee - Driver (Remove and Install)을(를) 참조하십시오.
-
일자 드라이버를 사용해 에어백 어셈블리의 후면 가장자리를 따라 압력을 가하면서 무릎 에어백 커버 주변부를 구부려 커버로부터 5개의 에어백 탭을 분리합니다.
Install
-
운전석 무릎 에어백을 커버에 장착합니다.
참고벌크헤드를 향하는 측면에서 탭을 커버로 밀어 넣은 후 완전히 안착될 때까지 남은 탭을 커버에 끝까지 밀어 넣습니다.
- 에어백 후면의 5개의 탭이 제자리에 고정될 때까지 에어백을 돌려 커버에 끼웁니다.
- 운전석 무릎 에어백 어셈블리를 장착합니다. Airbag - Knee - Driver (Remove and Install)을(를) 참조하십시오.