2023-03-21

Seal - Inner Belt - Front Door - LH (Remove and Replace)

Correction code 11703202 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. LH 전면 도어 트림 패널을 탈거합니다. Panel - Door Trim - Front - LH (Remove and Replace)을(를) 참조하십시오.
  2. 도어에서 내부 벨트 씰의 후면을 제거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    도어에 남아 있는 클립을 탈거한 다음 내측 벨트 씰의 후면에 클립을 장착합니다.
  3. 도어의 나머지 씰을 분리한 후 도어에서 씰을 탈거합니다.

Install

Installation procedure is the reverse of removal, except for the following:

  1. 장착을 완료한 후 창문을 보정합니다. Window Regulator (Recalibrate)을(를) 참조하십시오.
  2. 창문이 올바르게 작동하고 비정상적인 소음이 없는지 확인합니다.