2025-09-11

Reflex Lens - Rear - RH (Remove and Replace)

Correction code 17404502 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

  • 2025-07-24: 반사 렌즈 하단 립에 대한 주의 사항과 이미지를 추가했습니다.

Remove

Informational PurposesAn informational icon, calling your attention
참고
이 절차는 RH 쪽에만 적용됩니다. LH 후면 반사 렌즈는 충전 포트의 일부입니다.
  1. RH 후면 반사 렌즈 주변에 마스킹합니다.
  2. 플라스틱 트림 도구를 사용하여 RH 후면 반사 렌즈를 차체에 고정하는 클립을 분리한 다음 차량에서 RH 후면 반사 렌즈를 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    상단 오른쪽 클립을 먼저 부분적으로 분리한 다음 나머지 클립을 분리합니다.

Install

  1. RH 후면 반사 렌즈의 하단을 차량에 배치한 다음 렌즈를 차체에 고정하는 클립을 조입니다.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고
    먼저 렌즈의 하단을 올바른 위치에 삽입하십시오. 하단 립이 올바른 위치에 있지 않는 상태에서 힘을 가하면 부러질 수 있습니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    하단부를 올바른 위치에 놓고 RH 후면 반사 렌즈를 주의하여 단단히 눌러 클립에 완전히 안착시킵니다.
    그림 1. 하단 립
  2. 차체에서 마스킹 테이프를 떼어냅니다.
  3. RH 후면 반사 렌즈와 차체 간 갭 및 단차가 규격 이내인지 확인합니다.