Seal - Hood (Remove and Replace)
Correction code
11701802
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 후드를 엽니다.
-
후드 내 보관함에서 씰을 분리한 후, 후드 내 보관함에서 해당 씰을 탈거합니다.
Install
Installation procedure is the reverse of removal, except for the following:
-
장착하는 동안, 씰에서 라인을 후드 내 보관함의 라인 까지 정렬합니다.