Amplifier - Audio - External (Remove and Replace)
Correction code
21213502
0.36
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Torque Specifications
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
오디오 앰프를 서브우퍼 어셈블리에 고정하는 나사(3개) |
![]() 4.3 Nm (3.2 lbs-ft) |
|
Reuse |
Remove
-
서브우퍼 어셈블리를 탈거합니다. 참조 항목: Subwoofer (Remove and Replace).
경고전기 커넥터를 연결 해제하기 전에 12V 전원을 연결 해제했는지 확인하십시오. 탈거하기 전에 12V 전원을 연결 해제하지 않으면 손상이 발생할 수 있습니다.
-
오디오 앰프를 서브우퍼 어셈블리에 고정하는 나사(3개)를 탈거하고 서브우퍼에서 앰프를 탈거합니다.4.3 Nm (3.2 lbs-ft)TIp다음 공구 사용을 권장합니다.
- Torx T30 소켓
Install
Installation procedure is the reverse of removal.