USB Hub - Center Console - Front (Remove and Replace)
Correction code
21260402
0.36
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Torque Specifications
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
USB 허브를 센터 콘솔에 고정하는 나사 |
![]() 1.1 Nm (.8 lbs-ft) |
|
Reuse |
Remove
-
센터 콘솔을 탈거합니다. 참조 항목: Center Console (Remove and Install).
참고차량에서 센터콘솔 어셈블리를 탈거할 필요가 없습니다. 계기판에서 어셈블리를 한쪽으로 치워 USB 허브에 접근하십시오.
-
USB 허브에서 전기 배선 하네스 커넥터를 연결 해제합니다.
-
전기 하네스를 USB 허브에 고정하는 클립을 분리합니다.
-
USB 허브를 센터 콘솔에 고정하는 볼트를 탈거한 다음 센터 콘솔에서 USB 허브를 탈거합니다.1.1 Nm (.8 lbs-ft)TIpUse of the following tool(s) is recommended:
- Torx T20 소켓
Install
Installation procedure is the reverse of removal.