2021-06-09

Duct - Air Wave - LH (LHD) (Non-Heat Pump) (Remove and Replace)

Correction code 18108002 2.40 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. IP 캐리어를 탈거합니다. IP Carrier (LHD) (Remove and Replace)을(를) 참조하십시오.
  2. LH 에어 웨이브 덕트를 크로스 바 빔에 고정하는 나사(2개)를 탈거한 다음 차량에서 덕트를 탈거합니다.

Install

  1. LH 에어 웨이브 덕트를 크로스 카 빔에 설치한 다음 덕트를 빔에 고정하는 나사(2개)를 장착합니다.
    2.3 Nm (1.7 lbs-ft)
  2. IP 캐리어를 장착합니다. IP Carrier (LHD) (Remove and Replace)을(를) 참조하십시오.