2024-11-22

Hose - Return - HV Battery (Remove and Replace)

Correction code 18303702 3.48 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

  • 2023-08-14: 냉각수 손실이 1L를 초과할 때 진공 보충 요건에 대한 참고 사항을 추가했습니다.

Remove

  1. HV 배터리를 탈거합니다. 참조 항목: HV Battery (RWD) (Remove and Install).
  2. 클립을 분리하고 HV 배터리 플래터 인클로저의 RH 끝단에서 RH 내측 HV 배터리 리턴 호스 피팅을 연결 해제합니다.
  3. RH 내측 HV 배터리 리턴 호스를 HV 배터리에 고정하는 클립을 분리합니다.
  4. 클립을 분리하고 HV 배터리 플래터 인클로저의 LH 끝단에서 LH 내측 HV 배터리 리턴 호스 피팅을 연결 해제합니다.
  5. HV 배터리 리턴 호스를 HV 배터리의 LH 쪽에 고정하는 클립(5개)을 풀고, HV 배터리에서 호스를 탈거합니다.
  6. HV 배터리 리턴 호스에 플러그가 장착되어 있는 경우 탈거합니다.

Install

Installation procedure is the reverse of removal.