2025-04-04

스위치 - 트렁크 - 외부(탈거 및 교체)

Correction code 11355602 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Torque Specifications

표 1. Torque Specifications: 스위치 - 트렁크 - 외부(탈거 및 교체)
Description Torque Value Recommended Tools Reuse/Replace Notes
후방 카메라를 외부 트렁크 스위치에 고정하는 나사(2개)
1 Nm (.7 lbs-ft)
  • 세트, 1/2" 컷 비트. (더블 엔드 미니 래칫 78개)
  • 디지털 토크 스크루드라이버 0.10Nm - 2.0Nm
Reuse

Remove

  1. 트렁크 외부 스위치와 카메라 어셈블리를 탈거합니다. 참조 항목: 스위치 및 카메라 어셈블리 - 외부 해제 - 트렁크 (탈거 및 교체).
  2. 후방 카메라를 외부 트렁크 스위치에 고정하는 나사(2개)를 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 세트, 1/2" 컷 비트. (더블 엔드 미니 래칫 78개)
    • 디지털 토크 스크루드라이버 0.10Nm - 2.0Nm

Install

  1. 후방 카메라를 외부트렁크 스위치에 고정하는 나사(2개)를 장착합니다.
    1 Nm (.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 세트, 1/2" 컷 비트. (더블 엔드 미니 래칫 78개)
    • 디지털 토크 스크루드라이버 0.10Nm - 2.0Nm
  2. 트렁크 외부 스위치와 카메라 어셈블리를 장착합니다. 참조 항목: 스위치 및 카메라 어셈블리 - 외부 해제 - 트렁크 (탈거 및 교체).