Strut Reinforcement - Hood - LH (Remove and Replace)
Correction code
11332802
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
- 2024-03-28: 스트럿 보강재 너트에 대한 토크 값을 추가했습니다.
- 1080562-00-A 후드 지지대
Remove
- LH 후드 가스 스트럿을 탈거합니다. Gas Strut - Hood - LH (Remove and Replace)을(를) 참조하십시오.
-
LH 후드 스트럿 브래킷을 후드에 고정하는 너트를 탈거한 다음 스트럿 브래킷을 탈거합니다.
Install
-
LH 후드 스트럿 브래킷을 후드에 고정하는 너트(2개)를 장착합니다(토크 15Nm).
- LH 후드 가스 스트럿을 장착합니다. Gas Strut - Hood - LH (Remove and Replace)을(를) 참조하십시오.