Hose - Supply - Powertrain (Non-Heat Pump) (Remove and Replace)
Correction code 18303302 3.60 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- HV 배터리를 탈거합니다. 참조 항목: HV Battery (RWD) (Remove and Install).
-
클립을 풀고, 보조 베이의 RH 하단부에서 파워트레인 공급 호스 피팅을 연결 해제합니다.
-
파워트레인 공급(상단) 호스를 HV 배터리의 RH 쪽에 고정하는 클립(x5)을 분리하고 HV 배터리에서 호스를 탈거합니다.
- 파워트레인 공급 호스에 플러그가 장착되어 있는 경우 탈거합니다.
Install
Installation procedure is the reverse of removal.