2020-12-16

Cap - Reservoir - Windshield Washer (Remove and Replace)

Correction code 17501202 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 후면 후드 내 에이프런을 탈거합니다. 참조 Underhood Apron - Rear (Remove and Replace)
  2. 플라스틱 트림 공구를 사용하여 윈드실드 워셔액 저장탱크 필러 넥에서 캡을 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    캡과 고정 칼라는 일체형입니다.

Install

  1. 캡의 로케이팅 슬롯을 필러 넥의 로케이팅 탭과 정렬한 다음 캡을 필러 넥에 완전히 안착시킵니다.
  2. 후면 후드 내 에이프런을 장착합니다. 참조 Underhood Apron - Rear (Remove and Replace)