Service Mode Plus
Correction code 00050000 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
절차
-
Toolbox 3가 설치된 노트북을 차량에 연결합니다. 참조 항목: Toolbox 3(연결 및 연결 해제).
참고연결이 성공하면 정비 모드 플러스가 활성화되고, "Service Mode Plus" 워터마크가 터치스크린에 나타납니다.
-
정비 모드 플러스에서 필요한 작업 수행을 완료하면 정비 모드 메뉴 상단의 Exit Service Mode 버튼을 터치합니다.
참고Exit Service Mode 버튼이 보이지 않는 경우 터치스크린 상단의 Tesla "T"를 길게 터치한 다음 프롬프트에 "service"를 입력합니다.
- 차량에서 노트북을 연결 해제합니다. 참조 항목: Toolbox 3(연결 및 연결 해제).