2019-08-13

Actuator - Bleed - LH (Non-Heat Pump) (Remove and Replace)

Correction code 18102202 4.32 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 크로스 카 빔을 탈거합니다. Beam - Cross Car (LHD) (Remove and Replace)을(를) 참조하십시오.
  2. LH 블리드 액추에이터에서 전기 배선 하네스 커넥터를 연결 해제합니다.
  3. 액추에이터를 HVAC 모듈에 고정하는 볼트를 탈거한 다음 모듈에서 액추에이터를 탈거합니다.
    2.3 Nm (1.7 lbs-ft)

Install

Installation procedure is the reverse of removal.