Cover - Hood Latch (Remove and Replace)
Correction code
15241102
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 후드를 엽니다.
-
후드 래치 커버를 차체에 고정하는 클립을 분리합니다.
TIp커버의 바닥을 잡은 후 위쪽으로 당겨 클립을 분리합니다.
-
아동 안전 스위치 커넥터에서 전기 하네스를 연결 해제한 후, 차량에서 커버를 탈거합니다.
Install
Installation procedure is the reverse of removal, except for the following:
- 후드 래치 커버를 장착하기 전에 손전등을 사용하여 후드 래치 하우징 안쪽에 떨어져 있을 수 있는 이물질을 검사합니다. 이물질이 있는 경우 제거하고 후드 래치가 의도한 대로 작동하는지 확인합니다.
- 커버를 차체에 고정하는 후드 래치 커버의 클립(4개)에 손상이 없는지 검사합니다. 손상이 있거나 클립이 빠졌거나 없어진 경우, 후드 래치 패널 클립은 정비가 불가능한 부품이므로 후드 래치 커버를 새 부품으로 교체합니다.