Sensor - Temperature - LH (Remove and Replace)
Correction code
18107802
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 운전석 바닥 매트를 탈거합니다.
- 센터콘솔 LH 면 카펫을 탈거합니다. Side Panel - Center Console - LH (Remove and Replace)을(를) 참조하십시오.
-
LH 온도 센서 전기 커넥터를 연결 해제합니다.
-
LH 온도 센서를 HVAC 어셈블리 내부에 고정하는 탭을 분리한 다음 HVAC 어셈블리에서 LH 온도 센서를 탈거합니다.
참고플라스틱 트림 도구를 사용하여 탭을 분리한 다음 LH 온도 센서를 직선으로 당겨 HVAC 어셈블리에서 탈거합니다.
Install
-
LH 온도 센서를 HVAC 어셈블리에 장착한 다음 센서를 탭 2개로 고정합니다.
-
LH 온도 센서 전기 커넥터를 연결합니다.
- 센터콘솔 LH 면 카펫을 장착합니다. Side Panel - Center Console - LH (Remove and Replace)을(를) 참조하십시오.
- 운전석 바닥 매트를 장착합니다.