Sensor - Cabin Temperature (Remove and Replace)
Correction code
18107502
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- LH 전면 도어를 엽니다.
- LH 전면 윈도우를 내립니다.
-
플라스틱 트림 도구를 서비스 패널의 상부 중앙 슬롯으로 삽입한 다음 서비스 패널을 계기판에 고정하는 클립 및 탭을 분리합니다.
경고전기 하네스가 서비스 패널에 여전히 연결되어 있습니다. 계기판에서 서비스 패널을 너무 멀리 당기지 마십시오.
-
실내 온도 센서에서 전기 하네스를 연결 해제합니다.
- 터치스크린에서 서비스 패널을 탈거합니다.
-
실내 온도 센서를 터치스크린에 고정하는 볼트를 탈거한 다음 센서를 탈거합니다.0.7 Nm (6 lbs-in)
Install
Installation procedure is the reverse of removal.