2020-12-16

Switch - Power Trunk - Interior (Remove and Replace)

Correction code 11352702 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Torque Specifications

표 1. Torque Specifications: Switch - Power Trunk - Interior (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
내부 전동식 파워 트렁크 스위치를 전동식 트렁크 리드 트림에 고정하는 나사
1 Nm (.7 lbs-ft)
  • Torx T20 소켓
  • 래칫/토크 렌치
Reuse

Remove

  1. 파워 트렁크 리드 트림을 탈거합니다. Trim - Lid - Power Trunk (Remove and Replace)을(를) 참조하십시오.
  2. 실내 파워 트렁크 스위치에서 전기 하네스를 연결 해제합니다.
  3. 실내 파워 트렁크 스위치를 파워 트렁크 리드 트림에 고정하는 나사를 탈거한 다음 트림에서 스위치를 탈거합니다.
    1 Nm (.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 소켓
    • 래칫/토크 렌치

Install

Installation procedure is the reverse of removal.