Actuator - Intake (Remove and Replace)
Correction code
18102002
4.74
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- HVAC 어셈블리를 탈거합니다. HVAC Assembly (Non-Heat Pump) (Remove and Replace)을(를) 참조하십시오.
-
흡기 액추에이터 커넥터에서 전기 하네스를 연결 해제합니다.
-
흡기 액추에이터를 HVAC 모듈에 고정하는 나사(2개)를 탈거한 다음 HVAC 모듈에서 액추에이터를 탈거합니다.1.2 Nm (.9 lbs-ft)
Install
Installation procedure is the reverse of removal.