2024-11-14

혼 - 저음(탈거 및 교체)(LV 배터리)

Correction code 1753010042 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Informational PurposesAn informational icon, calling your attention
참고
이 절차는 LV 배터리 차량에만 적용됩니다.
표 1. Torque Specifications: 혼 - 저음(탈거 및 교체)(LV 배터리)
Description Torque Value Recommended Tools Reuse/Replace Notes
저음 혼을 혼 어셈블리 브래킷에 고정하는 볼트
9.5 Nm (7.0 lbs-ft)
  • 10mm 소켓
  • 육각 헤드 래칫/플렉스 헤드 토크 렌치
Reuse

Remove

  1. 차량에서 혼 어셈블리를 탈거합니다. 참조 항목: Horn Assembly (Remove and Replace).
  2. 저음 혼을 혼 어셈블리 브래킷에 고정하는 볼트를 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10mm 소켓
    • 육각 헤드 래칫/플렉스 헤드 토크 렌치

Install

  1. 저음 혼을 혼 어셈블리 브래킷에 고정하는 볼트를 장착합니다.
    9.5 Nm (7.0 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    참고
    저음 혼 커넥터는 브래킷 프레임과 수직이어야 합니다. 고음 혼에 닿지 않도록 저음 혼의 각도를 조정합니다.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10mm 소켓
    • 육각 헤드 래칫/플렉스 헤드 토크 렌치
  2. 혼 어셈블리를 차량에 장착합니다. 참조 항목: Horn Assembly (Remove and Replace).