Link - Stabilizer Bar - Front - LH (Remove and Replace)
Correction code
31012002
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- LH 전륜 휠을 탈거합니다. Wheel Assembly (Remove and Install)을(를) 참조하십시오.
-
전면 LH 스태빌라이저바 링크를 스태빌라이저바 및 댐퍼에 고정하는 너트를 탈거하여 폐기한 다음 차량에서 링크를 탈거합니다.98 Nm (72.3 lbs-ft)
Install
Installation procedure is the reverse of removal, except for the following:
Replace all nyloc nuts.