Seal - Inner Belt - Rear Door - LH (Remove and Replace)
Correction code
11704102
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- LH 후면 도어 트림 패널을 탈거합니다. Panel - Door Trim - Rear - LH (Remove and Install)을(를) 참조하십시오.
-
내측 벨트 실의 후면 및 전면 부분을 후면 도어에 고정하는 클립을 분리한 다음 내측 벨트 씰의 후면 및 전면 부분을 탈거합니다.
-
후면 도어에서 실의 스트립 피스를 길이를 따라서 천천히 벗깁니다.
Install
- 후면 도어 내측 벨트 씰을 후면 도어 안쪽으로 아래를 향해 누릅니다.
- 내부 벨트 씰을 후면 도어에 고정하는 클립(6개)을 장착합니다.
- LH 후면 도어 트림 패널을 장착합니다. Panel - Door Trim - Rear - LH (Remove and Install)을(를) 참조하십시오.