2026-08-05

Bracket - License Plate - Front (AU) (2025+) (Remove and Replace)

Correction code 12070800602 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-08-05: Newly released procedure.

Remove

  1. Apply masking tape around front license plate bracket to assist with installation.
  2. Remove front license plate bracket.

Install

  1. Clean surface area on front fascia for front license plate bracket installation.
  2. Install the self tapping bolts (x2) that attach the front license plate to the vehicle body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Remove adhesive cover, align front license plate bracket onto front fascia and apply even pressure to adhere the adhesive securing front license plate bracket.
  3. Remove masking tape from front fascia.