Seal - Body - Side - Front - Primary - LH (Remove and Replace)
    
    
    Correction code
    
                                    11700302
                                    
                                    0.06
                                    
        
          NOTE: Unless otherwise explicitly
          stated in the procedure, the above correction code and FRT reflect all of the work
          required to perform this procedure, including the linked procedures. Do not stack correction codes unless
            explicitly told to do so.
        
          NOTE: See Flat Rate Times to learn
          more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
        
        
          NOTE: See Personal Protection to make sure proper PPE is worn when
          performing the below
          procedure.
      
  
Remove
- Open the LH front door and lower the LH front window.
 - 
          Pull LH primary front side body seal
            away from the body, and then remove the seal from the vehicle.
          
 
Install
- 
          Position the LH primary front side
            body seal into the vehicle, and then press the seal into the body.
          NoteMake sure the seal is properly seated onto the interior trim.
 - Raise the LH front window and close the LH front door.