Cover - Trailer Hitch (Remove and Replace)
    
    
    
    Correction code
    
                                    10016002
                                    
                                    0.06
                                    
        
          NOTE: Unless otherwise explicitly
          stated in the procedure, the above correction code and FRT reflect all of the work
          required to perform this procedure, including the linked procedures. Do not stack correction codes unless
            explicitly told to do so.
        
          NOTE: See Flat Rate Times to learn
          more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
        
        
          NOTE: See Personal Protection to make sure proper PPE is worn when
          performing the below
          procedure.
      
  
Remove
- 
          Release the tabs (x10) and plastic
            retainers (x2) that attach the trailer hitch cover to the vehicle, and then remove the
            cover from the vehicle.
          CAUTIONThe plastic retainers are captive. Do not pry on the retainers as they may snap off.
 
Install
- 
          Position the trailer hitch cover onto
            the vehicle, and then secure the tabs (x10) and plastic retainers (x2) that attach the
            cover to the vehicle.