Wheel Alignment
- 2023-10-23: Revised specifications for front and rear camber and caster.
Note
All specifications given in degrees en
decimals. For alignment racks using degrees, minutes and seconds use the values in
brackets.
| Location | Front | Rear |
|---|---|---|
| Camber |
-0.85° +/- 0.45° (-0° 51' +/- 0° 27') |
-1.95° +/- 1.00° (-1° 57' +/- 1°) |
| Camber Split |
+/- 0.20° (0° 12') |
+/- 0.80 (0° 48') |
| Caster |
4.30° +/- 0.50° (4° 18' +/- 0° 30') |
Not applicable |
| Caster Split |
+/- 0.20° (0° 12') |
Not applicable |
| Total Toe |
0.0° |
In 0.20° (0° 12') |
| Toe Limits |
+/- 0.15° (0° 9') |
+/- 0.15° (0° 9') |
| Toe Split |
+/- 0.10° (0° 6') |
+/- 0.10° (0° 6') |
| Suspension Bolt Height (at design) |
259 mm |
192 mm |
| Chassis Height (unladen and suspension ride height set to "low") |
153.5 mm +/- 5.0 mm |
157.6 mm +/- 5.0 mm |
| Track Width (at wheel center height) |
1705 mm |
1710 mm |
| Item | Value |
|---|---|
| Thrust Angle | +/- 0.25° (0° 15') |
| Hand Wheel Clear Vision | +/- 1.5° (1° 30') |
| Wheelbase | 2965 mm |