Sleeve - Rear Door Spring - Rear - LH (Remove and Replace)
    
    
    Correction code
    
                                    11336112
                                    4.08
                                    
        
          NOTE: Unless otherwise explicitly
          stated in the procedure, the above correction code and FRT reflect all of the work
          required to perform this procedure, including the linked procedures. Do not stack correction codes unless
            explicitly told to do so.
        
          NOTE: See Flat Rate Times to learn
          more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
        
        
          NOTE: See Personal Protection to make sure proper PPE is worn when
          performing the below
          procedure.
      
    
  
Remove
- Remove the LH rear rear door spring to remove the rear door spring sleeve. See Rear Door Spring - Rear - LH (Remove and Replace).
 
Install
- Install the LH rear rear door spring. See Rear Door Spring - Rear - LH (Remove and Replace).